Carefully implement the following general rules regarding lathes:
1. When looking for a positive workpiece, only use the hand plate to move the chuck or open the minimum speed to find the right one.
2. When changing the direction of the spindle rotation, it is necessary to stop the spindle first, and it is not allowed to change the direction of rotation suddenly.
3. When loading and unloading the chuck, only the triangle belt can be rotated by hand to drive the spindle to rotate. It is absolutely forbidden to directly open the machine to force loosening or tightening. At the same time, it is necessary to put a piece of wood on the bed to prevent accidents.
4. The tool should not be extended too long, the gasket should be flat, and the width should be the same as the width of the bottom surface of the tool.
5, the work is not allowed to open the anti-vehicle method to brake the spindle rotation.
Aramid Gloves,High Temperature Resistant Gloves,Bbq Glove,Anti Cut For Knife
Wuxi WenqiIndustry and Trade CO.,LTD. , https://www.wenqiIndustry.com